
Could you take advantage of rainwater? Salher solutions for rainwater treatment
On October 24, the International Day of Climate Change is celebrated. Floods, droughts, pollution and shortages show us that water is closely linked to climate change. Salher offers a wide range of possibilities for the reuse of rainwater.
In order to control water resources in a sustainable way, Salher has various systems for reusing rainwater. Depending on the real needs of each customer, in the Salher product catalogue you can find different equipment to make up the most suitable treatment line.
One of the simplest equipment for this purpose within the Salher catalogue is the rainwater recovery system (RAP) for its reuse in irrigation of ornamental plants; a rainwater storage tank made of GFRP. It can be vertical or horizontal and includes a filter with a polyamide structure resistant to high pressures that will allow to retain those typical roof solids, such as tree leaves.
Likewise, the RAP has a baffle at the inlet of the storage tank to retain sand particles, typical on covers or roofs. This tank can be fitted with a submersible pump with floating suction performing the cleaner water suction for sprinkler irrigation.
For those cases in which it is foreseen that rainwater can be stored for a long time in the RAP tank, Salher has developed a complementary equipment to conserve the recovered water: the SAL-PLU. This equipment has a compact structure and manual measurement, allowing simple and accessible maintenance of rainwater.
In car parks, garages and other cases where rainwater presents traces of hydrocarbons and sand, it will be necessary to study solutions for the separation of hydrocarbons from water. Salher has extensive experience in the design and manufacture of hydrocarbon separators and currently has different models sized in accordance with UNE-EN 858 standard in tariffs.
For those areas of intense rain in short periods of time, hydrocarbon separators with a flow bypass device are the most interesting alternative. In addition, Salher offers specific accessories for the separation of hydrocarbons such as detection alarms for hydrocarbons, sand and solids and maximum levels, sampling manholes or even pedestrian folding cover with cut-out extension.
For reuse with more demanding destinations, such as flushing in toilets, irrigation of green areas by sprinkling or dripping, there are more advanced systems that allow meeting the most restrictive requirements of the R.D. 1620/2007. These systems can be physical-chemical or physical. To guarantee the maximum health conditions, Salher recommends its equipment by filtration with high efficiency MBR-AUT membranes.
Along with rainwater, the study of the reuse of gray water is recommended due to its regular flow and that allow a constant reuse and therefore more effective in the use of resources.
Contact us to study the most suitable solution for your particular need
Latest news
Europe tightens PFAS limits in drinking water, requiring the adoption of advanced treatment technologies
The entry into force of new mandatory limits for PFAS in drinking water across Europe since January 2026 is marking a turning point in the water treatment sector. To ensure their removal from water,...
What is water bankruptcy? Definition, causes and engineering solutions
Water bankruptcy refers to a situation in which more water is consumed than can be naturally replenished, treated, or sustainably managed, putting future availability, water quality, and economic...
Wastewater in the HORECA sector: a critical challenge for sustainability
Hospitality, restaurants and catering (HORECA) share a structural challenge that directly affects their operational, regulatory and environmental viability: wastewater management. Salher’s approach...
Salher Products
Designed and developed to meet all the requirements in water treatments.
Services
Project and Design
Engineering development and projects management.
Manufacturing
Production of GFRP, polypropylene and steel equipment.
Assembly of modular equipment and integration in civil works.
Supply
Selection of equipment and instrumentation to provide an integral water treatment solution.
Commissioning
Technical assistance in the electromechanical and electrical assembly of every water treatment plant.
Maintenance
Post-installation control service by a qualified technical staff.
Courses & documentary support
Practical training and delivery of manuals of operation, commissioning and maintenance.
![]()
salher@salher.com
Carrera Toledana, 33. Arganda del Rey. Madrid 28500. Spain.
+34 91 870 00 15
Spain / +34 91 870 00 15
Poland / +48 22 737 24 95
Portugal / +351 234 795 821
Engineering – Wastewater treatment – Purification – Liquid/solids separation equipment for industrial and municipal process applications – Surface water – Groundwater – Water Reuse – Drinking Water – Hydrocarbon and Oil Water Separation





