New Salher WWTP for a mining industry in Belarus
Salher has finished recently a wastewater treatment plant instalation for a mining processing industry in Belarus.
The Belarusian company located in the city of Pietrykaŭ commissioned Salher the engineering design, the manufacture and supply of equipment and now it has ended with the setting-up of the WWTP.
This new treatment station will be used to purify domestic the waters generated by the factory workers, in particular for an expected water flow of 710 m³/day through moving bed biofilm technology. To treat the sludge obtained during the purifying process, the water plant includes a secondary line with a thickener and a filter press.
In addition, the system has a rain water and wastewater reuse plant for a flow of 1.500 m³/day. The technology implemented in this case is an ultrafiltration system with final disinfection though ultraviolet radiation, UV.
One of the singularities of this project was that the phreatic level in the area is quite high, so in order to carry out the WWTP installation without problems, the water was frozen using chemicals, so the area was secure against flooding. Finally, the installation and commissioning has been a complete success and the plant works perfectly.
Find out more references of industrial wastewater, urban wastewater and drinking water projects of Salher.
Salher has collaborated through ABAKAL Ingenieros in BIALAC project, a fully automated pilot plant to experiment with a sustainable solution to develop a new biomaterial based on whey from dairy...
Digitalisation is a current reality that has a positive impact on people’s lives by easing daily tasks. From the water sector, Salher takes advantage of the digital tools, as the automated control...
Industry is one of the human activities that generates most polluting waste. Treating industry's wastewater properly is essential to control its environmental impact. Salher creates tailor-made...
Designed and developed to meet all the requirements in water treatments.
Project and Design
Engineering development and projects management.
Production of GFRP, polypropylene and steel equipment.
Assembly of modular equipment and integration in civil works.
Selection of equipment and instrumentation to provide an integral water treatment solution.
Technical assistance in the electromechanical and electrical assembly of every water treatment plant.
Post-installation control service by a qualified technical staff.
Courses & documentary support
Practical training and delivery of manuals of operation, commissioning and maintenance.
Carrera Toledana, 33. Arganda del Rey. Madrid 28500. Spain.
+34 91 870 00 15
Spain / +34 91 870 00 15
France / +33 1 84 16 47 84
Malaysia / +60 102 452 108
Mexico / +52 55 5081 8437
Peru / +51 620 0722
Poland / +48 22 737 24 95
Portugal / +351 234 795 821
Paraguay / +595 981 252 845
Philippines / +63 (0) 977 215 4199
Engineering – Wastewater treatment – Purification – Liquid/solids separation equipment for industrial and municipal process applications – Surface water – Groundwater – Water Reuse – Drinking Water – Hydrocarbon and Oil Water Separation